Description
BASIS:
Solvent-free Polychloroprene dispersion, particularly designed for bonding materials occurring Pedorthics,
Prosthetics, Orthotics, and related materials.
MATERIALS:
Many materials can be bonded with each other like PUR-foam (PPT, Poron), leather, rubber, expanded and
compact PE and PP types, EVA, cork, felt, Styren, ABS, wood , etc. A special precoating is not necessary.
Drying in an oven, with a heat gun, or IR is possible. Working with heat is not necessary, but allows working
faster. The adhesive film is very flexible and transparent. Water-resistance can be increased greatly by
mixing adhesive with 3-5% of Hardener =A300=.
INSTRUCTIONS:
First grind or sand all the materials. Clean foam from separators (tests are necessary). Clean compact
PE/PP if necessary. Aquilim 325 can be sprayed, applied with a roll, brush, doctor blade, etc. If a porous
material is combined with compact material, apply only on the compact side and fix the parts within a few
minutes. This greatly increases the drying time, since the water needs to evaporate through the top layer.
POT-LIFE:
4-6 hours when mixed with Hardener =A300=.
DRYING-TIME:
Depending to the combination of the materials and the method of application, the drying-time is 30-60 min.
The adhesive film can be reactivated with an IR lamp, with a quartz heater, a high-capacity IR-UV lamp or a
heat gun. The adhesive turns clear as soon as it is completely dry.
Solvent-free Polychloroprene dispersion, particularly designed for bonding materials occurring Pedorthics,
Prosthetics, Orthotics, and related materials.
MATERIALS:
Many materials can be bonded with each other like PUR-foam (PPT, Poron), leather, rubber, expanded and
compact PE and PP types, EVA, cork, felt, Styren, ABS, wood , etc. A special precoating is not necessary.
Drying in an oven, with a heat gun, or IR is possible. Working with heat is not necessary, but allows working
faster. The adhesive film is very flexible and transparent. Water-resistance can be increased greatly by
mixing adhesive with 3-5% of Hardener =A300=.
INSTRUCTIONS:
First grind or sand all the materials. Clean foam from separators (tests are necessary). Clean compact
PE/PP if necessary. Aquilim 325 can be sprayed, applied with a roll, brush, doctor blade, etc. If a porous
material is combined with compact material, apply only on the compact side and fix the parts within a few
minutes. This greatly increases the drying time, since the water needs to evaporate through the top layer.
POT-LIFE:
4-6 hours when mixed with Hardener =A300=.
DRYING-TIME:
Depending to the combination of the materials and the method of application, the drying-time is 30-60 min.
The adhesive film can be reactivated with an IR lamp, with a quartz heater, a high-capacity IR-UV lamp or a
heat gun. The adhesive turns clear as soon as it is completely dry.